Пул для непрофессионального майнинга

Тема в разделе "Пулы", создана пользователем Cont, 30 окт 2017.

  1. swa74

    swa74 Active Monerano

    Регистрация:
    8 окт 2017
    Сообщения:
    35
    Симпатии:
    17
    Ответ выше правильный, но учитывая такие вопросы начального уровня... Ответы на которые знает любой поисковик...
    --- Добавлено ---
    Даже опубликованный на github движок под XMR нуждается в настройках и допиливании, не говоря уже о других монетах.
     
  2. Nordvampir

    Nordvampir Piconero

    Регистрация:
    19 фев 2018
    Сообщения:
    6
    Симпатии:
    0
    подскажи пожалуйста как xmr-stak настроить что бы в дашбоард заходил ато у меня не получается. Я тоже на этом пуле хочу настроить майнинг!

    Прописываю вот так это пароль corei7:nordvampir@gmail.com аи номер кошелька пишу не дает блин войти,пишет проверьте Пожалуйста, проверьте свои данные для входа в систему
    /*
    * pool_address - Pool address should be in the form "pool.supportxmr.com:3333". Only stratum pools are supported.
    * wallet_address - Your wallet, or pool login.
    * pool_password - Can be empty in most cases or "x".
    * use_nicehash - Limit the nonce to 3 bytes as required by nicehash.
    * use_tls - This option will make us connect using Transport Layer Security.
    * tls_fingerprint - Server's SHA256 fingerprint. If this string is non-empty then we will check the server's cert against it.
    * pool_weight - Pool weight is a number telling the miner how important the pool is. Miner will mine mostly at the pool
    * with the highest weight, unless the pool fails. Weight must be an integer larger than 0.
    *
    * We feature pools up to 1MH/s. For a more complete list see M5M400's pool list at www.moneropools.com
    */
    "pool_list" :
    [
    {"pool_address" : "frankfurt-1.xmrpool.net:7779", "wallet_address" : "46UAKn4HYUHG7nADy26hmPd2utuAHj1CEeu1sucBW3mRcjC47xwfEKeU571sQzdxKiPaduWEhGqaBbTnYqdUoETUC3g5wc4",
    "pool_password" : "corei7:nordvampir@gmail.com", "use_nicehash" : false, "use_tls" : false, "tls_fingerprint" : "", "pool_weight" : 1 },
    ],

    /*
    * currency to mine
    * allowed values: 'monero' or 'aeon'
    */
    "currency" : "monero",

    /*
    * Network timeouts.
    * Because of the way this client is written it doesn't need to constantly talk (keep-alive) to the server to make
    * sure it is there. We detect a buggy / overloaded server by the call timeout. The default values will be ok for
    * nearly all cases. If they aren't the pool has most likely overload issues. Low call timeout values are preferable -
    * long timeouts mean that we waste hashes on potentially stale jobs. Connection report will tell you how long the
    * server usually takes to process our calls.
    *
    * call_timeout - How long should we wait for a response from the server before we assume it is dead and drop the connection.
    * retry_time - How long should we wait before another connection attempt.
    * Both values are in seconds.
    * giveup_limit - Limit how many times we try to reconnect to the pool. Zero means no limit. Note that stak miners
    * don't mine while the connection is lost, so your computer's power usage goes down to idle.
    */
    "call_timeout" : 10,
    "retry_time" : 30,
    "giveup_limit" : 0,

    /*
    * Output control.
    * Since most people are used to miners printing all the time, that's what we do by default too. This is suboptimal
    * really, since you cannot see errors under pages and pages of text and performance stats. Given that we have internal
    * performance monitors, there is very little reason to spew out pages of text instead of concise reports.
    * Press 'h' (hashrate), 'r' (results) or 'c' (connection) to print reports.
    *
    * verbose_level - 0 - Don't print anything.
    * 1 - Print intro, connection event, disconnect event
    * 2 - All of level 1, and new job (block) event if the difficulty is different from the last job
    * 3 - All of level 1, and new job (block) event in all cases, result submission event.
    * 4 - All of level 3, and automatic hashrate report printing
    *
    * print_motd - Display messages from your pool operator in the hashrate result.
    */
    "verbose_level" : 3,
    "print_motd" : true,

    /*
    * Automatic hashrate report
    *
    * h_print_time - How often, in seconds, should we print a hashrate report if verbose_level is set to 4.
    * This option has no effect if verbose_level is not 4.
    */
    "h_print_time" : 60,

    /*
    * Manual hardware AES override
    *
    * Some VMs don't report AES capability correctly. You can set this value to true to enforce hardware AES or
    * to false to force disable AES or null to let the miner decide if AES is used.
    *
    * WARNING: setting this to true on a CPU that doesn't support hardware AES will crash the miner.
    */
    "aes_override" : null,

    /*
    * LARGE PAGE SUPPORT
    * Large pages need a properly set up OS. It can be difficult if you are not used to systems administration,
    * but the performance results are worth the trouble - you will get around 20% boost. Slow memory mode is
    * meant as a backup, you won't get stellar results there. If you are running into trouble, especially
    * on Windows, please read the common issues in the README.
    *
    * By default we will try to allocate large pages. This means you need to "Run As Administrator" on Windows.
    * You need to edit your system's group policies to enable locking large pages. Here are the steps from MSDN
    *
    * 1. On the Start menu, click Run. In the Open box, type gpedit.msc.
    * 2. On the Local Group Policy Editor console, expand Computer Configuration, and then expand Windows Settings.
    * 3. Expand Security Settings, and then expand Local Policies.
    * 4. Select the User Rights Assignment folder.
    * 5. The policies will be displayed in the details pane.
    * 6. In the pane, double-click Lock pages in memory.
    * 7. In the Local Security Setting – Lock pages in memory dialog box, click Add User or Group.
    * 8. In the Select Users, Service Accounts, or Groups dialog box, add an account that you will run the miner on
    * 9. Reboot for change to take effect.
    *
    * Windows also tends to fragment memory a lot. If you are running on a system with 4-8GB of RAM you might need
    * to switch off all the auto-start applications and reboot to have a large enough chunk of contiguous memory.
    *
    * On Linux you will need to configure large page support "sudo sysctl -w vm.nr_hugepages=128" and increase your
    * ulimit -l. To do do this you need to add following lines to /etc/security/limits.conf - "* soft memlock 262144"
    * and "* hard memlock 262144". You can also do it Windows-style and simply run-as-root, but this is NOT
    * recommended for security reasons.
    *
    * Memory locking means that the kernel can't swap out the page to disk - something that is unlikely to happen on a
    * command line system that isn't starved of memory. I haven't observed any difference on a CLI Linux system between
    * locked and unlocked memory. If that is your setup see option "no_mlck".
    */

    /*
    * use_slow_memory defines our behaviour with regards to large pages. There are three possible options here:
    * always - Don't even try to use large pages. Always use slow memory.
    * warn - We will try to use large pages, but fall back to slow memory if that fails.
    * no_mlck - This option is only relevant on Linux, where we can use large pages without locking memory.
    * It will never use slow memory, but it won't attempt to mlock
    * never - If we fail to allocate large pages we will print an error and exit.
    */
    "use_slow_memory" : "warn",

    /*
    * TLS Settings
    * If you need real security, make sure tls_secure_algo is enabled (otherwise MITM attack can downgrade encryption
    * to trivially breakable stuff like DES and MD5), and verify the server's fingerprint through a trusted channel.
    *
    * tls_secure_algo - Use only secure algorithms. This will make us quit with an error if we can't negotiate a secure algo.
    */
    "tls_secure_algo" : true,

    /*
    * Daemon mode
    *
    * If you are running the process in the background and you don't need the keyboard reports, set this to true.
    * This should solve the hashrate problems on some emulated terminals.
    */
    "daemon_mode" : false,

    /*
    * Buffered output control.
    * When running the miner through a pipe, standard output is buffered. This means that the pipe won't read
    * each output line immediately. This can cause delays when running in background.
    * Set this option to true to flush stdout after each line, so it can be read immediately.
    */
    "flush_stdout" : false,

    /*
    * Output file
    *
    * output_file - This option will log all output to a file.
    *
    */
    "output_file" : "",

    /*
    * Built-in web server
    * I like checking my hashrate on my phone. Don't you?
    * Keep in mind that you will need to set up port forwarding on your router if you want to access it from
    * outside of your home network. Ports lower than 1024 on Linux systems will require root.
    *
    * httpd_port - Port we should listen on. Default, 0, will switch off the server.
    */
    "httpd_port" : 0,

    /*
    * HTTP Authentication
    *
    * This allows you to set a password to keep people on the Internet from snooping on your hashrate.
    * Keep in mind that this is based on HTTP Digest, which is based on MD5. To a determined attacker
    * who is able to read your traffic it is as easy to break a bog door latch.
    *
    * http_login - Login. Empty login disables authentication.
    * http_pass - Password.
    */
    "http_login" : "",
    "http_pass" : "",

    /*
    * prefer_ipv4 - IPv6 preference. If the host is available on both IPv4 and IPv6 net, which one should be choose?
    * This setting will only be needed in 2020's. No need to worry about it now.
    */
    "prefer_ipv4" : true,

    буду очень признателен если подскажите!!!
     
    #42 Nordvampir, 19 фев 2018
    Последнее редактирование: 19 фев 2018
  3. MoneroRus

    Команда форума Модератор Редактор

    Регистрация:
    30 ноя 2017
    Сообщения:
    219
    Симпатии:
    43
    Я так понимаю ты хожешь порог выплаты поменять?
    login:
    46UAKn4HYUHG7nADy26hmPd2utuAHj1CEeu1sucBW3mRcjC47xwfEKeU571sQzdxKiPaduWEhGqaBbTnYqdUoETUC3g5wc4
    password : nordvampir@gmail.com
    Такие данные вводишь?
     
  4. Nordvampir

    Nordvampir Piconero

    Регистрация:
    19 фев 2018
    Сообщения:
    6
    Симпатии:
    0
    Да
     
  5. MoneroRus

    Команда форума Модератор Редактор

    Регистрация:
    30 ноя 2017
    Сообщения:
    219
    Симпатии:
    43
    Ввел ваши данные и вошел.
     
  6. Nordvampir

    Nordvampir Piconero

    Регистрация:
    19 фев 2018
    Сообщения:
    6
    Симпатии:
    0
    спасибо но не мог понять почему вошел уже после вашего сообщения
     
  7. Nordvampir

    Nordvampir Piconero

    Регистрация:
    19 фев 2018
    Сообщения:
    6
    Симпатии:
    0
    Ребят подскажите что с дашбоардом такое ферма пашет нормально а на морде пула вот такая фигня
    [img]https://xmr.ru/data/attachments/0/596-0726ecd82b46f0bb6d47b14018569de8.jpg[/img]
     

    Вложения:

  8. MoneroRus

    Команда форума Модератор Редактор

    Регистрация:
    30 ноя 2017
    Сообщения:
    219
    Симпатии:
    43
    Если майнеры пишут что шары принимаются, то все норм. Скорее всего просто с дашбордом косяк, такое бывает.
     
  9. swa74

    swa74 Active Monerano

    Регистрация:
    8 окт 2017
    Сообщения:
    35
    Симпатии:
    17
    Ничего страшного, главное, что шары принимаются
     
  10. TesterOnOff

    TesterOnOff Piconero

    Регистрация:
    12 дек 2018
    Сообщения:
    1
    Симпатии:
    0
    Такая же фигня на https://xmrpool.net тоже не могу войти :(
     
  • О нас

    Наш сайт является одним из уникальных мест, где русскоязычное сообщество Monero может свободно общаться на темы, связанные с этой криптовалютой. Мы стараемся публиковать полезные мануалы и статьи (как собственные, так и переводы с английского) о криптовалюте Monero. Если вы хорошо владеете английским (или можете писать собственные статьи/мануалы) и хотите помочь в переводах и общем развитии Monero для русскоязычной аудитории - свяжитесь с одним из администраторов.